Preparation and installation of OpenWrt on the router jjPlus JA76PF02
Installing from console with serial connection
You should:
- Shut down the board
- Connect the Ethernet cable to the router’s (WAN port) and the other end to your computer
- Set the address of the network card on your computer to 192.168.1.1
- Run a TFTPD server and put in its root the files openwrt-ar71xx-generic-ja76pf2-kernel.bin and openwrt-ar71xx-generic-ja76pf2-rootfs-squashfs.bin
- Start the tftpd server
- Connect the serial cable to the board
- Start a serial terminal with parameters 8 n 1 115200
- Turn on the board
- and hit Ctrl-C to stop at the bootloader’s command line. Now you are in RedBoot
Continue reading Flash Openwrt Attitude Adjustment on jjPlus JA76PF2
Comments are closed 